Whirlpool error codes and warnings
Match the exact device and display before troubleshooting. These independent guides begin with published manufacturer information and keep the safe owner checks separate from service work.
Appliances
Whirlpool Washer F9 E1 Error: Meaning and Fixes
F9 E1 means a long drain time. Check the drain-hose installation, pump filter, and small drain openings in the door seal.
Read the guideWhirlpool Washer F8 E1 Error: Meaning and Fixes
The washer is not detecting the correct incoming water flow. Verify both faucets, hoses, and inlet screens.
Read the guideLaundry Appliances
Whirlpool Washer F8 E3 Error: Overflow Meaning and Fixes
F8 E3 indicates an overflow condition caused by too much water or foam. Stop active leaking and correct detergent use first.
Read the guideWhirlpool Washer F5 E3 Error: Door Lock Meaning and Fixes
The door is not locking properly. Remove anything blocking the latch and close the door completely.
Read the guideWhirlpool Washer SUD Error: Meaning and Fixes
The washer detected too many suds and is extending the rinse. Let it finish, then reduce detergent and check drainage.
Read the guideWhirlpool Washer F0 E5 Error: Off-Balance Meaning and Fixes
F0 E5 means the washer detected an off-balance load. Correct the load size and distribution before another spin.
Read the guideWhirlpool Washer F5 E2 Error: Door Lock Meaning
The door is not locking correctly. Remove trapped clothing, clean the latch area, and close it normally.
Read the guideWhirlpool Washer F7 E1 Error: Motor Speed Meaning
The motor did not reach the expected speed. Confirm shipping bolts are removed and the drum is not overloaded.
Read the guideWhirlpool Washer F8 E2 Error: Dispenser Meaning
The washer detected a dispenser-system problem. Clean the drawer or cartridge area without opening internal panels.
Read the guideWhirlpool Washer F3 E1 Error: Water Level Meaning
The control is not receiving a normal water-level signal. Record whether the tub is empty, overfilled, or draining.
Read the guideKitchen Appliances
Whirlpool Dishwasher F9 E1 Error: Long Drain Meaning and Fixes
F9 E1 means a long drain. Check the filter, drain hose, disposer knockout plug, air gap, and sink connection.
Read the guideWhirlpool Dishwasher F8 E4 Error: Float Switch and Leak Meaning
F8 E4 is associated with the float switch or water in the drip tray. Stop the supply and check for installation leaks or excess suds.
Read the guideWhirlpool Dishwasher F8 E5 Error: Fill Valve Stuck Open
F8 E5 means the fill valve may be stuck open. Shut off the dishwasher water supply if possible.
Read the guideWhirlpool Dishwasher Clean Light Flashing: How to Read the Error
A repeating two-part Clean-light pattern communicates an F/E code. Count each group and the pause between them.
Read the guideA nearby code is not necessarily the same code.
Confirm the model number and complete display in the official manual. If the code is missing, send us the brand, model, and exact warning.