Laundry Appliances error guides
Plain-English Samsung, Whirlpool, and LG washer codes, from water and drain faults to doors, balance, motors, and power.
Current guides
Match both the code and the brand. If your model is not covered, use the official manual linked inside the closest guide before taking action.
Samsung Washer 4C Error: Meaning and Fixes
The washer is not receiving water correctly. Check the supply valves, hoses, drain-hose position, and inlet screens before requesting service.
Read the guideSamsung Washer 5C Error: Meaning and Fixes
The washer is not draining at the expected speed. Start with the drain hose, pump filter, and any visible blockage.
Read the guideSamsung Washer Ub Error: Meaning and Fixes
The load is unbalanced. Redistribute the items, avoid washing one bulky piece alone, and confirm that the washer is level.
Read the guideSamsung Washer SUd Error: Meaning and Fixes
The washer detected excessive foam. Let its suds-reduction routine finish, then correct the detergent type or dose.
Read the guideWhirlpool Washer F9 E1 Error: Meaning and Fixes
F9 E1 means a long drain time. Check the drain-hose installation, pump filter, and small drain openings in the door seal.
Read the guideWhirlpool Washer F8 E1 Error: Meaning and Fixes
The washer is not detecting the correct incoming water flow. Verify both faucets, hoses, and inlet screens.
Read the guideSamsung Washer dC Error: Door Lock Meaning and Fixes
The washer does not detect a securely closed and locked door. Remove trapped clothing and inspect the latch before restarting.
Read the guideSamsung Washer LC Error: Leak Detection Meaning and Fixes
The washer detected moisture where it should not be or a water-level sensor problem. Look for leaks before restarting.
Read the guideSamsung Washer OC Error: Overflow Meaning and Fixes
The washer detected more water than expected. Stop uncontrolled filling and inspect drainage before another cycle.
Read the guideSamsung Washer 9C Error: Voltage Meaning and Safe Checks
The washer detected irregular incoming electrical power. Remove extension cords and verify the dedicated circuit before using it again.
Read the guideWhirlpool Washer F8 E3 Error: Overflow Meaning and Fixes
F8 E3 indicates an overflow condition caused by too much water or foam. Stop active leaking and correct detergent use first.
Read the guideWhirlpool Washer F5 E3 Error: Door Lock Meaning and Fixes
The door is not locking properly. Remove anything blocking the latch and close the door completely.
Read the guideWhirlpool Washer SUD Error: Meaning and Fixes
The washer detected too many suds and is extending the rinse. Let it finish, then reduce detergent and check drainage.
Read the guideWhirlpool Washer F0 E5 Error: Off-Balance Meaning and Fixes
F0 E5 means the washer detected an off-balance load. Correct the load size and distribution before another spin.
Read the guideLG Washer IE Error: Water Inlet Meaning and Fixes
IE means the washer did not reach the expected water level. Check the faucets, hoses, and inlet screens before requesting service.
Read the guideLG Washer OE Error: Drain Meaning and Fixes
OE means the washer is draining too slowly or not at all. Inspect the hose and clean the model-approved pump filter.
Read the guideLG Washer UE Error: Unbalanced Load Meaning and Fixes
UE means the washer could not balance the load for spin. Redistribute the items and confirm that the machine is level.
Read the guideLG Washer dE Error: Door Lock Meaning and Fixes
dE means the washer could not lock its door. Remove trapped clothing, clean the latch area, and close the door normally.
Read the guideLG Washer LE Error: Locked Motor Meaning and Fixes
LE means the motor cannot operate normally, often after an overload or obstruction. Reduce the load and let the motor cool.
Read the guideLG Washer FE Error: Overflow Meaning and Safe Steps
FE means the washer detected an overfilled tub. Stop uncontrolled filling and shut off the water supply.
Read the guideLG Washer tE Error: Temperature Sensor Meaning
tE indicates a heating or temperature-sensor error. One power reset is reasonable; a returning code needs service.
Read the guideLG Washer CL Code: Child Lock Meaning and How to Turn It Off
CL usually means Control Lock or Child Lock is active—not that the washer has failed.
Read the guideDo not assume a similar code means the same thing.
Check the model number and manufacturer manual first. You can also send us the brand, model, and exact display for consideration in a future guide.