NETGEAR states that a solid amber power LED normally means the router is powering on.
What Solid amber power means
NETGEAR states that a solid amber power LED normally means the router is powering on.
What you may notice
- The display or status light shows Solid amber power
- A red or critical fault light appears
- The device may not complete startup
- Normal service is unavailable
Most likely causes
- 01Startup did not complete
- 02Firmware is corrupted
- 03A reset was interrupted
- 04The power supply is unstable
- 05The device has an internal hardware fault
Safe checks, in order
Start with the simplest non-invasive check. Stop as soon as the error clears; repeated resets can hide a condition without correcting it.
Confirm the exact pattern
Solid and blinking lights can mean different things.
Let startup finish
Wait the full manufacturer-specified interval before intervening.
Restart once
Use the normal power procedure only when no update or reset is active.
Use reset only when documented
Follow the exact button timing and understand that settings will be erased.
Know where to stop
Stop using a device or adapter that is swollen, scorched, wet, or unusually hot.
When to call a technician or support
Contact manufacturer support if the critical light remains after the documented recovery procedure.
When you call, have the exact product model, the complete code or light pattern, and when it appeared.
Where this information came from
We use the manufacturer's current published guidance as the starting point, then organize it into a safer, beginner-friendly sequence.
NETGEAR Support — router LED meanings Source last checked August 18, 2026. Manufacturer instructions and model manuals take priority over this independent summary.